Description
XH-W3001 thermostat 12V with temperature display
The XH-W3001 temperature controller module is ideally suited for monitoring and regulating temperatures.
The display shows the current temperature with an accuracy of 0.1°C. If the measured value differs from the actual temperature, the device can be calibrated via the two buttons. The setting of the temperature limits is also done via the buttons.
Depending on how these limits are set, the relay is activated either when the temperature exceeds or when it falls below the limit. Thus, it is possible to switch on a heater when the temperature falls below the set temperature or to switch on a cooler when the temperature exceeds the set temperature. Whether the relay allows the current to flow or not is indicated by the LED, marked OUT, next to the display. The relay can switch a maximum of 10A at 12V DC, a load of 120W. The built-in temperature probe has a 1m cable and a stainless steel cap. This cap is resistant to many external influences. It is rustproof, waterproof and can survive contact with acid for a short time.
Specifications:
- Power supply: 12V DC
- Maximum current: 10a
- Maximum performance: 120W
- Temperature measuring range: -50 ℃ -110
- Temperature control area: -50 ℃ -110
- Temperature control accuracy: ± 2%
- Temperature measuring accuracy: ± 5%
- Cable length of the temperature sensor: 1m
- Size: 85x44x30mm
- Weight: 44g
With your order at AZ-Delivery you will receive a product in the usual high quality! For more ideas and projects visit our blog.
Welcome to the AZDelivery family! Here you will find high quality products for your projects with Arduino and Raspberry Pi. We are happy to offer you a range of application examples, complete installation guides, e-books, libraries and personal support.
AZ-Delivery: Your microelectronics expert!